manualshive.com logo in svg

Atlas Copco GA 37 VSD, Инструкция

Поделиться
Скачать
Atlas Copco GA 37 VSD Скачать руководство пользователя страница 74

 

Minimum
setting

Factory
setting

Maximum
setting

Dewpoint warning temperature

ºC

 

25

99

Dewpoint warning temperature

ºF

 

77

210

Service plan

The built-in service timers will give a Service warning message after their respective
preprogrammed time interval has elapsed.

For specific data, see section Preventive Maintenance.

Consult Atlas Copco if a timer setting needs to be changed. The intervals must not exceed the
nominal intervals and must coincide logically. See section 

Modifying general settings

.

Terminology

Term

Explanation

ARAVF

Automatic Restart After Voltage Failure. See section 

Elektronikon regulator

.

Power recovery
time

Is the period within which the voltage must be restored to have an automatic restart. Is
accessible if the automatic restart is activated. To activate the automatic restart function,
consult Atlas Copco.

Restart delay

This parameter allows to programme that not all compressors are restarted at the same
time after a power failure (ARAVF active).

Compressor
element outlet

The recommended minimum setting is 70 ˚C (158 ˚F). For testing the temperature
sensor the setting can be decreased to 50 ˚C (122 ˚F). Reset the value after testing.
The regulator does not accept inconsistent settings, e.g. if the warning level is
programmed at 95 ˚C (203 ˚F), the minimum limit for the shut-down level changes to 96
˚C (204 ˚F). The recommended difference between the warning level and shut-down
level is 10 ˚C (18 ˚F).

Delay at signal

Is the time period during which the warning signal must exist before the warning
message appears.

Delay at start

Is the time period after starting which must expire before generating a warning. The
setting should be less than the setting for the delay at signal.

Minimum stop
time

Once the compressor has automatically stopped, it will remain stopped for the minimum
stop time, whatever happens with the net air pressure.

Proportional
band and
integration time

The settings for the Proportional band and integration time are determined by
experiment. Altering these settings may damage the compressor. Consult Atlas Copco.

Instruction book

72

API480496

Содержание GA 37 VSD

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды