Atlantis V700D-20W, Руководство пользователя

Страница: 19 / 27

19
detailed information on your nearest collection centre can be obtained from your
Municipality or from other competent local entities.
If you are replacing the old equipment with a new equivalent product, the
distributor must take-back the old equipment free of charge on a one-to one basis
as long as the equipment is of equivalent type and fulfilled the same functions as
the supplied equipment.
Your rôle in participating to the separate collection of waste of electric and
electronic equipment is essential to ensure that environmental protection and
human health objectives connected to a responsible treatment and recycling
activities are achieved.
PS.: The above mentioned information are reported herewith in compliance with Directive
2002/96/CE, which requires a separate collection system and specific treatment and disposal
procedures for the waste of electric and electronic equipments (WEEE). For further and more
detailed information, we invite you to visit our website at www.atlantis-land.com
Atlantis suggest to vistit the web site www.atlantis-
land.com in order to retrieve update manual, techsheet
and driver.
Before starting, take a few minutes to read this manual.
Read all of instructions and save this manual for later
reference.
Cautions in installation
 Do not install the camera in extreme temperature conditions. Do use the camera
under conditions where temperatures are within -10
℃
~+40
℃
.
 Do not install the camera under unstable lighting conditions. Severe lighting
change or flicker can cause the camera to work improperly.
 Do not install or use the camera in an environment where the humidity is high
(85%RH maximum). It can result in poor-quality image.
 Do not disassemble the camera. There are no user serviceable parts inside it.
Opening or removing the camera’s cover may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified personnel only.
 Do not touch the imaging surface of sensor. Use a soft cloth with alcohol to clean
the surface if it is touched accidentally.
 Ensure the supply voltage is correct before operation. Camera must be connected
to a surge protector at all times.