Atlantis V700D-20W, Руководство пользователя, Страница: 20 / 27

20
 Do not focus the camera on the sun directly.

Handle this camera with care Avoid any shock or bumping of the camera.
Improper handling could damage the camera.
 Clean the front face to the pick-up device It is recommended that the pick-up
device surface be cleaned before lens installation or whenever the lens is
changed. Cleaning should be done by using a chamois, a very fine soft cloth, lens
tissue, or cotton tipped applicator and ethanol to carefully remove any fingerprint
or dust.
 Objects and liquid entry Never push objects of any kind into this camera as this
may touch dangerous voltage points of short out parts that could result in a fire
or electric shock. Never spill any kind of liquid on the video product.
 Damage requiring service unplugs this video product from the wall outlet and
refers service to qualified servicing personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been dropped or the cabinet has been damaged.
d. When the video product exhibits a distinct change in performance.
Warranty
 This product is covered by Atlantis On-Site 1 year warranty. For more detailed
informations please refer to the web site www.atlantis-land.com. For more
detailed instructions on configuring and using this device, please refer to the
online manual.
 This product is covered under warranty for one year from the date of purchase.
The warranty will automatically be voided if any of the following occurs:
 If the camera sticker is removed, we will not be able to confirm any information
regarding when and where the product was purchased. We have no other way to
verify the purchase record without the serial number on the camera sticker;
therefore, it should not be removed.
 If the camera is scratched, damaged, or modified in a manner not described in
this manual, the warranty will be voided immediately. It is the customer’s
responsibility to keep the camera in good condition.

The video cable and the power cable should not be tampered with. Cutting or
modifying of the cables will result in termination of the warranty.