Atlantis A03-OP1001-RC, Руководство пользователя

Страница: 73 / 107

ENG
73
UPS setting mode.
ON/MUTE +
SELECT
 Switch to bypass mode: When the main power is normal,
press ON/Mute and Select buttons simultaneously for 3
seconds. Then UPS will enter to bypass mode. This action
will be ineffective when the input voltage/frequency is out
of acceptable range.
 Exit setting mode or return to the upper menu: When
working in setting mode, press ON/Mute and Select buttons
simultaneously for 0.2 seconds to return to the upper menu.
If it’s already in top menu, press these two buttons at the
same time to exit the setting mode.
OFF/Enter
 Rack or Tower display switch: Press Select and
OFF/Enter buttons simultaneously for 3 seconds. The display
change from/to Rack to/from Tower.
3.2 LCD Panel
Display Function
Backup time information
Indicates the backup time in pie chart.
Indicates the backup time in numbers.
H: hours, M: minute, S: second
Fault Information
Indicates that the warning and fault occurs.
Indicates the warning and fault codes, and the codes
are listed in details in this manual.