3
TADK1800
Cut a short (6”) piece of weighted tubing from the end of the roll opposite the diffuser.
Insert the unmarked side of the check valve into one end of the 6” piece of tubing and
connect the other end to the ⅜” brass outlet fitting included with the TA1800 air pump.
Trim the remaining tubing from the diffuser to length and connect to the outlet end of the
check valve.
Note: The outlet side of the check valve has a small “OUT” molded in the side. Direction of
flow can be easily verified by blowing into the end of the check valve.
TADK3600
Cut three short (6”) pieces of weighted tubing from the end of the rolls opposite the dif-
fusers. Connect one piece of tubing to the included tee and connect the other end to the
⅜” brass outlet fitting included with the TA3600 air pump. Insert the unmarked side of the
check valves into the ends of the two remaining short pieces of tubing and connect the
other ends to the tee. Trim the weighted tubing from the diffusers to length and connect to
the outlet end of the check valves.
Warranty
The Typhoon Professional Aeration Kit carries a three-year warranty for detailed warranty
information, please refer to the TA1800 / TA3600 Product Manual. This limited warranty is
extended solely to the original purchaser commencing from the date of original purchase
receipt. A misused or abused product voids this warranty.
Warranty Claims
In case of warranty claims, return the kit to the place of purchase, accommpanied by the
original receipt.
