background image

8

 

In order to maintain the performance levels of your radiator, dust needs to be removed from the 

lower and upper grills of the appliance approximately two times per year using a vacuum cleaner or 

a brush. The appliance can be cleaned using a damp cloth; never use abrasive products and solvents. 

In a polluted environment, dirt can appear on the appliance's grill. This phenomenon is associated 

with the poor quality of the ambient air. In this case, we recommend checking that the room is 

properly ventilated (ventilation, air inlet, etc.). This dirt does not constitute grounds for warranty 

replacement of the appliance. 

 

 

 

 

 

 

 

 

2 - OPERATION 

 

2.1 - The control unit 

 

 

 

2.2 - Turning on / Stopping heating  

 
To turn on the appliance, press  . 
The green ring around the 

 key lights up. 

To turn the heating off, press  . 

The green ring around the 

 key turns off. 

 

2.3 - Locking / Unlocking the commands  

 

 

Access settings and operating information 

Consumption indicator 

Confirm 

Decrease 
Navigate 

Display information  

Follow instructions 

Turn on   

Stop heating 

 

Increase Navigate 

Back 

Содержание Oniris AH503907





























Отзывы: