19
18
If the appliances are paired, you can deactivate the open window detection of a single
appliance without deactivating the others (refer to the "Configurations" chapter in the
"Expert Menu").
6.2 - Presence
(not available on Plinth version)
Allows your room to be heated only when someone is
present. The appliance will then heat in Comfort mode.
To optimise your appliance's presence detection
function, the appliance must be installed to enable
optimum detection (for example: do not install the
appliance behind a sofa, in a frequently used area, such
as a corridor, near a wardrobe, etc.).
Detection is not possible underneath
the sensor.
6.2.1 - Activating/Deactivating the function
Function always active in AUTO MODE
For example: your appliance is set to 19°C in Comfort mode (whether or not it is programmed).
-
at 09:00 hrs it detects your presence;
-
at 09:30 hrs the operating temperature changes to 18°C;
-
at 10:00 hrs the operating temperature changes to 17°C.
