5
4
1- INSTALLING THE APPLIANCE
1.1- Installing the appliance
Your appliance is delivered with its own wall bracket. However, the choice of screws and of wall
plugs depends on the nature of your wall and you are responsible for ensuring that you use screws
and wall plugs that are adapted to the weight of the appliance.
Once the cardboard box cover has been removed, you can remove the wall bracket, which you can
then use as a hole drilling template.
To facilitate connection, this appliance (horizontal and low height version) has been designed so that
it stands upright throughout the connection period. For a Vertical appliance, ensure that the
appliance is placed in its wedge against the wall until it is placed on the wall bracket.
1.1.1 - Installation guidelines
This appliance has been designed to be installed in a residential room.
The installation must be carried out implementing best practices and in accordance with the current
standards in the country of installation (NFC 15100 for France).
Observe the minimum distances from furniture when locating the appliance (refer to the diagram).
Horizontal and Plinth Model
Vertical Model
If you have a foam-mounted wall covering then
a wedge having the same thickness as the foam
must be placed under the appliance's bracket
so that an open space is maintained behind the
appliance to prevent any interference with its
adjustment.
[Grab
your
reader’s
attentio
n with a
great
quote
from the
docume
nt or use
this
space to
emphasi
ze a key
point. To
place
this text
box
anywher
e on the
page,
just drag
it.]
Sizes in cm
Sizes in cm
