Atlantic MULTI ELEC, Техническое руководство

Страница: 16 / 20

INSTALLATION
The “multi-elec” electric boiler should be installed in a louvered plantroom in order to
ensure an ambient temperature below 30ºC and relative humidity between 30 and 80%.
The boiler should not be used in a corrosive atmosphere or in an external position.
Adequate access should be left around the boiler in order to carry out maintenance.
The following safety devices are obligatory:

Safety valve (4 Bars maximum)

An automatic air vent on the boiler flow

A blow down valve
Electrical wiring
The“multi-elec” electric boiler should be connected to 415V without neutral
The circuit breaker and the cables section should be chosen according to British
standards.
Class 1 material IP21 / IK08
If the boiler is powered without any water, it will generate the thermocouple failure (no
warrantee)
Transport and storage
The unit should be transported and stored in the original package until it reached the
installation point.
Ambiant temperature below 80ºC
Relative humidity between 30 and 80%