STARTING THE BOILER
Remove the power fuses
Check that the boiler is filled with water
Check that the immersion heaters are sound
. If isolation is below 2MΏ, please
find the reason and remdy it.
Turn the power on using the main switch and the key switch
Check that the circulation pump is running.
Check that there is a lockout if the circulations pump stops
Adjust the temperature settings
Stop the boiler using the main switch
Put the power fuse in
Switch the boiler back on
Check the immersion heaters electrically for faults. Tight all the connections up
after one week of operation
If the boiler is powered without any water, it will cause the immersion heaters or
sensors to fail (no warranty)
Содержание MULTI ELEC
Страница 2: ...2 ...
Страница 10: ...VIEW OF THE CONTROL PANEL ...