Atlanta Attachment Company 1335MF, Техническое руководство и перечень запасных частей

Страница: 22 / 86

Technical Manual & Parts Lists
16
General Machine Maintenance
Daily
 Clean machine at the end of every shift
 Clean lint etc. from the Looper/bobbin area on the sewing head
 Remove any threads wrapped around moving parts of the handwheel, puller, and
ruffler.
 Wipe all photo eye lenses with clean, nonabrasive, dry cloth
 Use blow-off hose to get rid of excess lint, thread and other clippings
 Follow manufactures recommendations and guidelines for daily maintenance and
lubricating of the sewing head.
Weekly
 Check all belts for tightness and condition. Adjust or replace as necessary.
 Check oil level in oil pan.
 Put one drop of machine oil on all moving Ruffler parts.
Electric Eye Sensor Adjustment
To adjust the sensor, first remove the clear plastic cover from the end of the
sensor. There are two adjusting screws under the cover. One is labeled “GAIN” and is
used to set the sensitivity of the sensor. The other
screw is labeled “DO & LO” and should always be fully
clockwise.
With the end of the sensor pointing at the center
of the reflective tape, turn the “GAIN” screw counter-
clockwise until the red LED indicator is off. Then turn
the “GAIN” screw clockwise until the LED indicator
comes on. Then turn the “GAIN” screw one full turn
clockwise. The LED indicator should be blinking slowly.
Cover the eye so that the sensor cannot see the
reflective tape and the LED should go off.
Reflective Tape Maintenance
Use a soft cloth for cleaning.
Do not use chemicals or abrasives to clean it.
Avoid any contact with oils and liquids.
Do not touch the tape with bare fingers.
If tape is dirty or opaque, the eye may not function correctly.
11335MF Recommended Spare Parts List
Contact AAC’s sales department to order replacement parts.
Phone: 770-963-7369
Fax: 770-963-7641
Email: sales@atlatt.com
Website: www.atlatt.com
AAC Part # SP1335MF Spare Parts Kit