ATIM_ACW-DINRSM_UG_EN_V2.8
13
Four major sections can be distinguished here. The ‘Serial parameters’ section is at the top
left, ‘Other parameters’ at the centre left, the Modbus configuration section at the right and the debugging
area at the bottom.
Parameter settings for Radio and Modbus frames
In the Modbus section at the right, you can add radio (network) and Modbus frames, add a
Modbus frame to a radio (network) frame, edit a Modbus frame as well as delete and test Modbus frames.
Right-clicking in this area will open a context menu (shown below) that lists the various actions just
described. You can also access these actions more quickly by using the keyboard shortcuts shown on the
right side of the context menu.
ACW-DIN RSM
firmware version
Radio module firmware
version
radio module
Network ID
Product reference
Restore factory settings
Reload settings
Apply settings
