12
Contents
Declaration of conformity
5-6
Device description / Spare parts
12
Extent of delivery
12
Assembly 12
Symbols machine
12
Symbols used in the operating instructions
12
Characteristic noise values
12
Normal intended use
13
Residual risks
13
Safe working
13
Commissioning 14
Adjustments on the hedge trimmer
14
Working instructions
15
Maintenance and care
15
Storage 15
Guarantee 15
Possible faults
15
Technical data
16
Description / Spare parts
Pos. Denomination
Order-No.
1.
Impact protection with suspension
shackle
2.
Knife
3.
Cover strip
4.
Hand guard
364102
5.
Front handhold with switch button
6.
Ventilation slots
7.
Switch for the angular motion of the
rear handhold
8.
ON-OFF switch
9.
Rear handhold with circuit closer and
circuit breaker
10.
Cable with power plug
11.
Knife protection
364103
12.
Carbon brush set (without picture)
13.
Safety label
362990
Extent of delivery
•
Hedge trimmer
•
Hand guard
•
Knife protection
•
Operating manual
After unpacking, check the contents of the box
!
That it is complete
!
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Electrical devices do not go into the domestic
rubbish. Give devices, accessories and
packaging to an ecofriendly recycling.
Assembly
Attach the hand guard (4) with screws to the device prior to
startup. (Page 2, fig. A).
Symbols machine
Carefully read
operator’s
manual before
handling the
machine.
Observe in-
structions and
safety rules
when
operating.
Shut off engine
and remove power
cord before perfor-
ming cleaning,
maintenance or
repair work.
Do not expose
to rain or
moistness.
When connecting
cable is damaged
or cut through
immediately pull
out the power plug.
Wear eye and
ear protection.
Wear protection
gloves.
Symbols used in the operating instructions
Threatened hazard or hazardous situation.
Not
observing this instruction can lead to injuries or
cause damage to property.
L
Important information on proper handling.
Not
observing this instruction can lead to faults in the
machine.
User information
. This information helps you to
use all the functions optimally.
Assembly, operation and servicing
. Here you are
explained exactly what to do.
Operating times
Before initiating the device please observe the provisions
pertaining to corresponding laws (regional provisions) for the
noise control.