14
Repairs
to other parts of the machine must be carried
out by the
manufacturer
or one of his customer
service points.
Use only original
spare parts and accessories. Accidents
can arise for the user through the
use of other spare
parts
. The manufacturer is not liable for any damage or
injury resulting from such action.
S
S
t
t
a
a
r
r
t
t
-
-
u
u
p
p
Check
that the machine is completely and correctly
assembled.
To avoid toppling, place the chopper on a firm horizontal
surface.
The machine should only be operated
in the open
.
Always maintain a safe distance
(at least 2 m) from
walls or other fixed objects.
Before using the shredder
, make sure each time that
−
there are no faulty connections (tears, cuts, etc.)
−
there are no damage at the machine
−
all screws are tight
L
Mains connection
Compare the voltage given on the machine model plate
e.g. 230 V with the mains voltage and connect the
machine to the relevant and properly earthed plug.
Only use
connection cables
with sufficient diameters
Fuse protection
only UK and Switzerland
1600 W 10 A inert
1800 W 16 A inert
13 A inert
2000 W 16 A inert
13 A inert
2200 W 16 A inert
13 A inert
2300 W 16 A inert
13 A inert
2400 W 16 A inert
13 A inert
2500 W 16 A inert
13 A inert
Electrical mains supply impedance
When conditions in the electrical mains supply are un-
favourable, voltage reductions for short periods can occur
during the process of turning on the equipment, which can
adversely affect other equipment (e.g., the flickering of a
lamp).
No breakdowns are to be expected if the maximum, electrical
mains supply impedances given in the table are met.
Power consumption P
1
(watts)
Electrical mains supply
impedance Z
max
(
Ω
)
1600 0,28
1800 – 2000
0,22
2200 – 2500
0,21
Changing the direction of rotatio
n
L
Always switch the device off and wait until it comes
to a standstill before changing the direction of rotation.
left positon:
cutting rollers
run
backwards
and release
blocked
shredding
material
right positon:
cutting rollers
draw in and
cut
shredding
material
Switching on
Press the green I button.
Switching off
You can switch off the shredder by pressing the red 0
button of the switch.
Lock in case of power outage
The equipment will switch off automatically if there is a power
cut (zero-voltage initiator). Repress the green button to
switch it on again.
Motor guard
The motor is equipped with a guard switch and it switches off
automatically when overloaded. The motor can be switched
on again after a cooling-down period (approximately 5 mins.).
Repress
1. button A
2. button green I to switch it on again.
W
W
o
o
r
r
k
k
i
i
n
n
g
g
w
w
i
i
t
t
h
h
t
t
h
h
e
e
g
g
a
a
r
r
d
d
e
e
n
n
s
s
h
h
r
r
e
e
d
d
d
d
e
e
r
r
Choose a
working position
alongside the equipment or
behind it. Never stand near the ejecting opening.
Never
reach into the filling or ejection opening.
Keep your face and body away from the filling opening.
Never place hands, other parts of the body or clothing into
the filler funnel, ejection channel or in the vicinity of other
moving parts.
Check that no chopped residues are in the filling hopper
before switching on the equipment.
Do not tip or tilt the machine when the motor is running.
When filling, be careful that no pieces of metal, stones,
bottles or other objects unintended for processing, enter
the filling hopper.
Immediately switch off the equipment and allow it to come
to a stop, if foreign objects enter the filling hopper or if the
equipment starts to make unusual noises or vibrates.
Remove the mains plug and carry out the following
checks:
−
inspect for damage,
−
replace or repair damaged parts,
−
check the equipment and tighten loose parts.
You must not repair the equipment yourself if you
are unauthorized to do so.
ON
OFF
A
