ATI Technologies Scan Alarm C14, Руководство пользователя

Страница: 23 / 53

- 23 -
Back
The Back key works like an “Escape” key. Press it to:
•
Abort editing.
•
Return to a previous menu.
•
Switch between single channel and job control displays.
Enter
Press the Enter key to:
•
Store data or menu choices after editing and go to the next menu.
•
Start scanning mode (if pressed twice).
Alarm Ack
Press Alarm Ack to:
•
Acknowledge an alarm condition, and reset the global alarm.
•
Stop the scanning display.
Alarm Reset
Press Alarm Reset to:
•
Clear an alarm when the process is in a no-alarming state.
•
Acknowledge an alarm if the process is in an alarming state.
Change SP
Press Change SP to change the setpoints.
Func
The FUNC key is not used in normal operation. It is reserved for future
enhancement.
WARNING
A Manual System Reset clears the system’s memory and reinitializes the
Scanner factory defaults. To do a Manual System Reset, power down the
Scanner, press and hold the No key during power up. This is required
during installation, after changing the EPROM, or when troubleshooting. If
using ANASCAN you may need to set the communications baud rate, and
protocol before communication can be established.
SP
CHNG
FUNC