ATI Technologies FireGL X3-256, Руководство пользователя

Страница: 24 / 54

18 Reinstalling Drivers
Note: When you use multiple monitors with your FireGL™ card,
one monitor will always be Primary . Any additional monitors will be
designated as Secondary .
Reinstalling Drivers
The software installation procedure detailed in this chapter describes how
to install the drivers for your graphics card after you have installed a new
card for the first time and have rebooted your computer.
If you are installing the graphics card drivers in a special working scenario,
such as if you have reinstalled your operating system or want to perform a
manual reinstallation.
To reinstall drivers using the ATISETUP utility
You can always install the drivers using the
ATISETUP
utility on the ATI
Installation CD-ROM. The
ATISETUP
utility will start automatically if
you insert the ATI Installation CD-ROM into your CD-ROM drive after the
operating system has started. If your CD-ROM auto-run is not enabled or
the
ATISETUP
utility does not start automatically, perform the following
actions:
1
Click the
Start
button in the task bar.
2
Select
Run
.
3
Browse
to ATISETUP.EXE on the root directory of the ATI
Installation CD-ROM and click
OK
.
To manually reinstall drivers
To manually reinstall drivers, when prompted for a driver installation CD,
insert the ATI Installation CD-ROM and browse to the
drivers
subdirectory .