® Copyright ATH-Heinl GmbH & Co. KG, 2012, All rights reserved. / Misprints and technical changes reserved / Issue: 08/2014
21
9. Anchoring with anchor bolts:
a. Drill holes with the necessary drilling depth
A and diameter according to the
manufacturer specifications
b. Clean the inside of the hole
c. Put an anchor bolt into the hole and
hammer it until it reaches the bottom of the
hole.
d. After point 10 is made tighten the nut
according to manufacturer´s specified
torque.
Clamping thickness B depends on flooring
10. Adjustment of lift
