35
36
6.2.4 Historical information
Clicking “historical information” can enter into the sub-menu of the "historical
information".
History of failure: all the common history of failure details can be found by flipping
the page up and down.
The common fault information, see table 6.3.1.
6.2.5 Operation data
Clicking the “Operation data” in any interface will enter into the submenu of
“operation data”.
The sub-menu includes: real-time data, the power curve, and energy yield figure.
Pressing the left button can enter into the corresponding sub menu interface. The
default interface is the real-time data interface.
Insert USB Disk on the back of the LCD display, and the real time operation data will
be stored in the USB Disk in every minute. Inverter will create a “CSV” format file
every month in the USB disk for data storage.
Real-time data: current DC power generation parameters and real-time data
including the grid voltage, the grid frequency, the grid current, DC input voltage, DC
input current, the internal temperature of the chassis as well as the total power
generation time (updated in real time). When total power is more than 100,000kW, it
will be measured by MK; when total power is less than 100,000kW, it will be
measured by kW.
