ATEQ ERD620, Быстрый старт

Страница: 45 / 48

QSG_ERD620_421.00_EN_01 / 2020-09-09
45
/
48
CONFIGURATION menu
Use this menu to configure your ATEQ device.
Label Function Description
LANGUAGE
Language Selection of the language displayed on the screen
PNEUMATIC
Pneumatics Configuration of the pneumatics functions of the device
> READY STATUS - Out of cycle electronic regulator instruction choice (Only
for Direct or Indirect Flow Test and do not use with ERD)
> Press. UNIT - Pressure unit by default for the new programs
AUTOMATISM
Automatism
Configuration of the different communications between the
device and its environment
> RS232
-
Configuration of the communication type on the RS232
port
> USB - Sending result frames to a PC
> Date & Time - Setup of the built-in clock
> SEQUENCE
-
If activated YES, the instrument will work in sequence
mode (32 sequences with 16 programs possible by
sequence) and the relay board inputs will select the
sequences
> OUTPUTS CONFIG.
-
Configuration of the programmable outputs
> INPUTS CONFIG.
-
Configuration of the programmable inputs
> CODE READER
-
Bar code reader configuration
SECURITY
Security
Security functions
> ACCESS
-
Parameters access mode (key or password)
> EXT. ACCESS
Lock/Unlock external access to the parameters by Fieldbus
> START OFF
-
Deactivation of the Start on the instrument front panel.
Programs can only be started from the instrument relay board.
MISCELLANEOUS
Miscellaneous
> SMART KEY -
Configuration of the assigned function to the Smart key
> BARGRAPH
- Bargraph display configuration (Only for Direct or Indirect
Flow Test and do not use with ERD)
32/34