ATEN VM5404H, Руководство пользователя

Страница: 46 / 127

VM5404H / VM5808H User Manual
34
Profile Pushbutton
The PROFILE pushbutton lets users conveniently switch between connection
profiles that have been saved or added to the Profile List (see Profile List ,
page 39).
When a Profile is in use, its profile number (P1–P16) is shown on the lower
right corner of the LCD display.
The Profile pushbutton functions as follows:
 After pressing the Profile pushbutton, available profile numbers will light
up. The active profile number will flash. use the Input/Output pushbuttons
to switch to a specific profile (P1 to P16) or (P1 to P8). Note that:
 Input ports 1–8 or 1-4 correspond to Profile P1 to P8 or P1 to P4
 Output ports 1–8 or 1-4 correspond to Profile P9 to P16 or P5 to P8
(where Output Port 1=Profile 9, Output Port 2=Profile 10... Output
Port 8=Profile 16)
The selected pushbutton’s light flashes, and the VM5404H / VM5808H
immediately applies the port connections configured in the selected
profile. If the light changes to a steady state, it means the profile is valid.
 After pressing the Profile pushbutton, pressing it again will change to next
profile in Profile Scheduling (see page 45), not the profile list. This feature
is only available while a schedule is playing.
 Press the Cancel pushbutton to exit
Note: If there are no profiles configured on the VM5404H / VM5808H device,
an error message “
No Available Profile ” is displayed when the Profile
pushbutton is pressed.
A Profile’s port connections can be edited using the front panel pushbuttons
(see
Port Switching , page 17) or from the Connections page of the Browser
GUI (see Configuring Video Settings of a Profile , page 47). Additionally, the
Profile List can be configured via the Profile page of the Browser GUI (see
Profile List , page 39).
INPUT 1 2 5 5 1 1 3 4
OUTPUT 1 2 3 4 5 6 7 8
P1