ATEN VM0808, Руководство пользователя

Страница: 34 / 47

VM0808 User Manual
26
Remote Control Operation
The remote control allows you to change the Output port status for each display
using the IR remote control device included with your VM0808.
You can use the remote control to: change the Input source of any Output
display port, power on/off any individual Output display, or power on/off all
Output displays simultaneously.
Before using the remote control feature you must first plug the IR External
Receiver into the rear of the VM0808 (see
External IR Receiver Port , page 6),
and place the receiver where the IR signal can be reached.
Change the Input source of an Output port
To change the Input source for an Output display, use the remote control to do
the following:
1. Press the OUTPUT port number (1–8) you want to change.
2. Press the INPUT port number (1–8) you want the OUTPUT port to display
within 2 seconds.*
3. Repeat steps 1-2 to change additional ports.
*For the change to occur the INPUT number must be pressed within 2
seconds of pressing the OUTPUT number.
Power on/off individual Output displays
To power on/off individual Output displays, use the remote control to do the
following:
1. Press the OUTPUT port number (1–8) you want to power on/off.
2. Press the ON or OFF pushbutton within 2 seconds.*
3. Repeat steps 1-2 to change the power status back on/off.
*For individual power on/off to occur properly the ON or OFF
pushbutton must be pressed within 2 seconds of pressing the OUTPUT
number. Failing to do so will result in all displays being powered on or
off respectively.