Chapter 3. Operation
15
Independent Audio In Selection
The audio signal can be switched independently of the video signal, to use with
any other audio ports connection, using the Switch Audio Only menu. To
create an independent audio connection, from the Main Screen do the
following:
1. Press the Menu pushbutton to access the Menu page, and select [ENTER]
Switch Audio Only.
2. Use the OUT turner dial to select the desired Input port, corresponding to
the Output port’s audio you would like to change.
3. When the cursor [ ] highlights your selected input port, use the IN dial to
cycle through the available audio Input sources, to associated it to the
Output port above it.
Options are Ports 1–8, NA (none).
4. Press OUT, IN, or ENTER pushbuttons to confirm your selection to switch
audio to the selected port.
5. Press ESC to return to the Menu page.
ESC
ENTER
PROFILE
MENU
Switch Audio Only
Set Serial Port
IN
OUT
ESC
ENTER
PROFILE
MENU
OUTPUT A 01 02 03 04 05 06 07 08
INPUT A 01 02 03 04 05 06 07 08
IN
OUT
ESC
ENTER
PROFILE
MENU
OUTPUT A 01 02 03 04 05 06 07 08
INPUT A 01 02 03 04 05 06 07 08
[ ]
IN
OUT
