VM0808 User Manual
14
Main Screen
The Main screen displays Output Ports 1–8 in sequential order across the top.
The Input source displaying on each Output port is shown directly beneath it.
From the Main screen, you can set the Input to Output connections that route
the signals from a selected Input port to the selected Output port. To do so you
simply change the Input source associated for each Output display.
From the Main screen; pressing the PROFILE pushbutton cycles through the
connection Profiles setup in Profile Selection, pressing the MENU pushbutton
accesses the Menu page options. Pressing the ESC or MENU pushbutton at
anytime returns you to the Main screen.
Video In Selection
To select which input source displays on each output port, from the main screen
do the following:
1. Turn the OUT dial to select an output port’s corresponding input port.
2. When the cursor [ ] highlights your selected input port, use the IN dial to
cycle through the available input sources.
Options are: Ports 1–8, NA (none)
3. Press the OUT, IN, or ENTER pushbutton to confirm your selection. The
VGA signal from the selected input port is now tied to the output port
above it.
4. Repeat steps 1–3 for all required ports.
Note:
This operation ties two signals (audio, video) from a selected input
to a selected output port. For independent switching of the audio
signal, see the following section,
Independent Audio In Selection
ESC
ENTER
PROFILE
MENU
[ ]
OUTPUT 01 02 03 04 05 06 07 08
INPUT 01 02 03 04 05 06 07 08
IN
OUT
