8
Chapter 2
Hardware Setup
Rack Mounting
The VM0808 can be mounted in a 19” (1U) system rack. For the most
convenient front panel configuration and operation, mount the unit at the front
of the rack, as follows:
1. Use the M3 x 8 Phillips head hex screws supplied with the Rack Mount
Kit to screw the rack mounting brackets onto the front of the unit.
(Continues on next page.)
1. Important safety information regarding the placement of this
device is provided on page 34. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation are turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.
Phillips Head Hex
M3 x 8
