Chapter 3. Front Panel Configuration
31
Profile Pushbutton
The
PROFILE
pushbutton lets users conveniently switch between connection
profiles that have been saved or added to the Profile List (see
When a Profile is in use, its profile number (P1-P8 or P1–P16) is shown on the
lower right corner of the LCD display.
The Profile pushbutton functions as follows:
After pressing the Profile pushbutton, available profile numbers will light
up. The active profile number will flash. Use the Input/Output pushbuttons
to switch to a specific profile (P1 to P8) or (P1 to P16). Note that:
Input
ports
1
to
4
or
1
to
8
correspond to Profile
P1
to
P4
or
P1
to
P8
Output
ports
1
to
4
or
1
to
8
correspond to Profile
P5
to
P8
(where
Output Port 1=Profile 5, Output Port 2=Profile 6... Output Port
4=Profile 8) or
P9
to
P16
(where Output Port 1=Profile 9, Output Port
2=Profile 10... Output Port 8=Profile 16)
The LED of the selected pushbutton flashes, and the VM0404HB /
VM0808HB immediately applies the port connections configured in the
selected profile. The profile is valid when the LED lights steady.
After pressing the Profile pushbutton, pressing it again will change to next
profile in Profile Scheduling (see page 43), not the profile list. This feature
is only available while a schedule is playing.
Press the
Cancel
pushbutton to exit.
Note:
If there are no profiles configured on the VM0404HB / VM0808HB
device, an error message “
No Available Profile
” is displayed when the
Profile pushbutton is pressed.
A
Profile
’s port connections can be edited using the front panel pushbuttons
, page 17) or from the
Connections
page of the Browser
Additionally, the Profile List can be
configured via the Profile page of the Browser GUI (see
INPUT 1 2 5 5 1 1 3 4
OUTPUT 1 2 3 4 5 6 7 8
P1
