background image

Chapter 3. Front Panel Configuration

29

Save to a Profile

The switch allows users to store up to 8 (VM0404HB) or 16 (VM0808HB) 
(numbered P1-P8 or P1–P16) different connection profiles that can be saved 
and recalled later. 

The active Input-to-Output port connections on the LCD Main Screen is the 
configuration saved to a profile. When a user loads a profile, the change is 
immediate and the profile number is shown on the lower right corner of the 
LCD screen. 

To save a profile once the desired port connections are set, do the following:

1. Press the 

Menu

 pushbutton to access the Menu page, then 

8

 or 

 twice 

to navigate to the next pages. Press pushbutton 

1

 to open the select Save to 

a Profile page.

2. On the page that opens, you are asked to give the profile a number. Use the 

front panel number pushbuttons to select a profile number into which you 
want to save the configuration.

VM0404HB

: Options are P1–P8 (when saving a profile via the LCD), 

where:

Š

Input port pushbuttons 

1–4

 correspond to Profile 

P1 

to

 P4

Š

Output port pushbuttons 

1–4 

correspond to Profile 

P5 

to

 P8

VM0808HB

: Options are P1–P16 (when saving a profile via the LCD), 

where:

Š

Input port pushbuttons 

1–8

 correspond to Profile 

P1 

to

 P8

Š

Output port pushbuttons 

1–8 

correspond to Profile 

P9 

to

 P16

3. Press 

Enter 

to store the configuration – the LCD shows Profile Saved.

4. Press 

Menu

 to return to the Menu page, 

5. Press 

Cancel

 to return to the previous step without saving.

Note:

Access the Save to a Profile page quickly by pressing the 

Profile 

pushbutton for longer than 3 seconds. 

1: Save to a Profile
2: Play the Profile Schedule

7: Back

Save to a Profile No. 0            
In 1-8=P1-P8;  Out 1-8=P9-16.

Содержание VM0404HB





































































































Отзывы: