Hardware Requirements
Console
M
One VGA, SVGA, or Multisync monitor capable of the highest
resolution that you will be using on any PC in the installation
M
One PS/2 Mouse
M
One PS/2 Style Keyboard
Computers
The following equipment must be installed on each PC that is to be
connected to the system:
M
A VGA, SVGA or Multisync card.
M
Either a 6-pin mini-DIN (PS/2 style), or DB-9 (standard serial),
mouse port.
M
Either a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on
pin 4 and Ground on pin 3, or a 5-pin DIN (AT Style) keyboard port
with +5V DC on pin 5 and ground on pin 4.*
* See the note under Cables in the next section.
Cables
Although it is possible to use standard cables to connect the PCs to the
CS-114A, for optimum signal integrity and to simplify the layout, we
strongly recommend that you use the following high quality CS Custom
Cable sets:
PC Connector Type
CS Custom Cable
AT (5 pin DIN) Keyboard and Serial Mouse 2L-1001 P/C (1.8m); or
PS/2 (6 pin mini-DIN) Keyboard and Mouse 2L-1001 3P/C (3m)
Dasiy Chain Master View CS114A Units
Note: 1. These cables have PS/2 style keyboard connectors. If your
computer only has an AT style keyboard socket, you will
need a keyboard adapter (Part No. 2A-106), in order to plug
into the computer’s keyboard port.
2. These cables have PS/2 style mouse connectors. If your
computer uses a 9 pin serial port, you will need a special
PS/2-to-Serial mouse adapter (Part No. 2A-105); a standard
mouse adapter will probably not work.
- 2 -
2001 - 01 -03
