ATEN eco PE Series, Руководство пользователя

Страница: 52 / 92

eco PDU PE Low Profile Series User Manual
42
Configuration
The Configuration page is used to configure the settings of the eco PDU at the
individual power outlet level:
„
Power On Time Schedule Settings
Check the Enable Power On Time Schedule box to use the Power ON
Delay setting to set the amount of time the eco PDU waits before powering
on an outlet. See Power ON Delay in the table on the next page.
„
Buzzer Setting
Checking the Enable Buzzer Alarm box sounds an alarm and sends
SNMP trap or e-mail alerts when a circuit breaker trips or a PDU/Bank
threshold setting exceeds the minimum or maximum setting.
„
Outlet Configuration
The Outlet Configuration section lets you set the power management settings
for each outlet on the PDU.
:
Heading Meaning
Outlet Name Each outlet can be given a distinctive name. The maximum number
of characters is 15.
Confirmation
Required If this option is enabled (there is a check in the checkbox), a dialog
box comes up asking you to confirm a power operation before it is
performed. If it is disabled (there is no check in the checkbox), the
operation is performed without confirmation.