ATEN eco PE Series, Руководство пользователя

Страница: 32 / 92

eco PDU PE Low Profile Series User Manual
22
No. Item Description
1 Power Cord This is the power cord that connects the unit to an
AC power source via NEMA L5-30P plug.
2 Circuit Breakers (Bank 1
and Bank 2) 2 x 16A Slim Breakers. As a safety measure, if
there is an overcurrent situation regarding the
device’s power, the circuit breakers will trip. Push
the switch back to recover normal operation.
3 Power Sockets* 40 in total: (40 x NEMA 5-15R)
Bank1: Outlet 1 –20; 20 x NEMA 5-15R
Bank2: Outlet 21–40; 20 x NEMA 5-15R
4 Sensor Ports External sensors plug into these two RJ-11 ports.
5 LAN Port and LEDs The cable that connects the eco PDU to the LAN
plugs in here. The Link and LAN LEDs are built
into the LAN port:
Link : Lights GREEN to indicate that a connection
via the eco PDU's RJ-45 Ethernet port has been
established. Flashes to indicate data is being
transmitted.
LAN : Lights ORANGE to indicate 10 Mbps data
transmission speed. The LED lights GREEN to
indicate 100 Mbps data transmission speed.
6 Readout Section, LEDs
and Reset Switch Details of this section are provided on page 24.