ATEN ALTUSEN PN0108, Руководство пользователя

Страница: 64 / 92

PN0108 User Manual
54
4. Slide the First Station's Firmware Upgrade switch to the RECOVER
position.
a) Its Port LEDs blink at half second intervals.
b) The STATION ID LEDs display the word, UP , and blink at half second
intervals.
5. Slide the First Station's Firmware Upgrade switch back to the NORMAL
position.
a) The First Station's STATION ID LEDs display the Station ID's of all the
daisy chained stations in sequence (01, 02, 03...)
b) After the First Station has run through the sequence, its STATION ID
LEDs display the word, UP , and blink at 1 second intervals. Its Port
LEDs also blink at 1 second intervals.
c) Next, all the Port LEDs on the daisy chained stations blink at 1 second
intervals, and their STATION ID LEDs display the word, UP , which
also blinks at 1 second intervals.
d) Finally, all STATION ID LEDs return to displaying their Station ID
numbers, indicating that they are ready for the firmware upgrade
procedure, and you may start the upgrade.
Note: 1. Each station is upgraded in turn. The STATION ID LEDs of the
station currently receiving the upgrade display the word, UP , and
blink at 1 second intervals. All other STATION ID LEDs display
their station numbers, and also blink at 1 second intervals.
2. All stations restart automatically after they have been
successfully upgraded.
pn0108.book Page 54 Friday, December 14, 2007 4:15 PM