Chapter 3. OSD Operation
45
(Continued from previous page.)
Setting
Function
BUS
AUTHORIZAT
ION
This function allows the Super Administrator to authorize Operator
access to Stations on the installation other than the ones connected to
the Station the Operator is logged in on.
For each Operator, press the
[Spacebar]
to cycle through the choices:
F
(Full access),
V
(View Only), or blank (No access). Repeat until all
access rights have been set, then press
[Enter]
.
The default is blank
–
No Operators have access rights to other
Stations (and the computers connected to them).
FIRMWARE
UPGRADE
In order to upgrade the KM0216 / KM0432's firmware (see Chapter 6),
you must first invoke Firmware Upgrade Mode with this setting. Only
the Super Administrator on the Master Station can utilize this function.
km0216-0432.book Page 45 Wednesday, April 14, 2010 3:17 PM
