ATEG Automation GmbH
|
Intzestraße 50
|
42859 Remscheid
|
Germany
|
Tel.: +49 (0)2191 / 591457-0
|
|
www.ateg.de
Datenblatt
Zeitrelais H3DT
H3DT
H3DT-N/H3DT-L
9
Note: 1.
The reset time is 0.1 s min. Make sure the signal input time is 0.05 s or longer.
2.
“t” is the set time. “t
a” is a time that is less that the set time.
E2: Interval (Power ON Start)
E3: Signal OFF Interval
F2: Cumulative (ON Delay)
F3:Cumulative (Interval)
t
t−a
t−a
t
Power (A1 and A2)
Time-limit contacts: NC
15 and 16 (25 and 26)
Time-limit contacts: NO
(output indicator)
15 and 18 (25 and 28)
Instantaneous contacts: NC
(21 and 22)
Instantaneous contacts: NO
(21 and 24)
Operation / Power indicator
Power
Output
Timing
Basic Operation
t
t
t−a
t−a
t−a
Power (A1 and A2)
Time-limit contacts: NC
15 and 16 (25 and 26)
Time-limit contacts: NO
(output indicator)
15 and 18 (25 and 28)
Instantaneous contacts: NC
(21 and 22)
Instantaneous contacts: NO
(21 and 24)
Operation / Power indicator
Start input (B1 and A1)
*
The start input is valid while the Timer is in operation.
Power
Start input
Output
Timing
Basic Operation
t
t1+t2=t
t−a
t1
t2
Power (A1 and A2)
Time-limit contacts: NC
15 and 16 (25 and 26)
Time-limit contacts: NO
(output indicator)
15 and 18 (25 and 28)
Instantaneous contacts: NC
(21 and 22)
Instantaneous contacts: NO
(21 and 24)
Operation /
Power indicator
Start input (B1 and A1)
Timing
Timing
Holding
Power
Start input
Output
Note: Timing is performed while the start input is ON.
Basic Operation
Power (A1 and A2)
Time-limit contacts: NC
15 and 16 (25 and 26)
Time-limit contacts: NO
(output indicator)
15 and 18 (25 and 28)
Instantaneous contacts: NC
(21 and 22)
Instantaneous contacts: NO
(21 and 24)
Operation / Power indicator
Start input (B1 and A1)
t1+t2=t
t
t−a
t1
t2
Timing
Timing
Power
Start input
Output
Holding
Note: Timing is performed while the start input is ON.
Basic Operation
Erstellt am 04.09.2021 um 04:38 Uhr | Alle Angaben ohne Gewähr, Irrtümer und Änderungen vorbehalten!
Seite 10 von 37
