13
Operating and Safety Instructions
5.3. ELECTRIC CONNECTION
5.2.1.
The three-phase power cable socket has to be in accordance with the socket on
the machine.
5.2.2.
Use a connection cable socket in accordance with the UL & CSA Safety Directives.
5.2.3.
Check the inlet power supply before powering the machine. See Page 18 Item 3.8.3.
5.2.4.
Make the electric socket connections after switching the MAIN SWITCH on the
machine to 0.
*The socket connections have to be made by a qualified electrician, the rotation direction
of the saw blade has to be observed by starting the machine. If the saw blade rotates in
reverse direction, the socket connections have to be checked and re-connected
properly.
**If the saw blade rotates in reverse direction, it will cause danger for the operator and the
equipment.
To correct the rotation direction of the saw blade, insert the electric power socket of the
machine to the 3-phase slot, which has been prepared before, and follow these
instructions:
1. Press the Motor Start Button to operate the saw blade.
2. Monitor the rotation direction of the saw blade through the blade slot.
3. The correct direction is shown with an arrow on the machine table.
The electric socket connections have to be checked and corrected by a qualified
electrician.
The rotation direction of the saw blade should not be defined before testing.
CAUTION !
Saw Blade Rotation Direction
