x
100mm
Spacers (may be required for
recessed and uneven surfaces)
VESA monitor head
VESA monitor head
Gap
No Gap
3mm Allen Key
4mm Allen Key
Loosen
Tighten
Security Screw
Hole
Spring Tension
Adjustment
M4 x 14mm
Security Screw
Monitor head
screw
Arm Assembly
Screen
M4x12/16/25mm
Phillips Head Mounting Screws
100mm 75mm
75mm
+ Tighten
Loosen -
Step 3. Install VESA monitor head
Step 4. Mount Display
4.1
Insert VESA monitor head into the receptacle in the Arm
Assembly.
4.2
Ensure that the VESA monitor head sits flush within the
Arm Assembly receptacle. There should be
no
gap.
4.3
Once the VESA monitor
head is sitting flush, push
the lever down to secure it
to the Arm Assembly.
4.4
OPTIONAL
Ensure the Monitor is supported,
then loosen the Monitor head
screw with the 3mm Allen Key
and tilt screen up before installing
the M4 x 14mm Security Screw
into the Security Screw hole.
Step 5. Adjust Spring Tension
5.1
To ensure the monitor will stay in position anywhere
within its range of movement, the spring tension on the
arm will need to be adjusted to suit the weight of the
monitor.
Note:
Ensure the Lever is
flicked
up
before installation
onto the Arm Assembly.
3.1
Install VESA monitor head as shown.
Support the weight of the
monitor at a high position
(as shown) and tighten the
spring tension until you
feel the arm supporting the
weight of the monitor.
Note:
Support
Screen when
adjusting tilt.
