Step 3. Install Wall Channel
Nylon
Anchors
8mm (0.3”)
holes
M6 x 50mm
Countersunk
Screw
Systema
Monitor Arm
or Monitor
Spring Arm
Top Cap
Top Cap
Screws
M6 x 50mm
Countersunk
Screw
Systema
Monitor Arm
or Monitor
Spring Arm
Top Cap
Screws
Top Cap
5.5mm (0.2”)
holes
Installation Complete
You are now ready to install your Systema Monitor Spring Arm.
Please refer to the Installation Instructions Included with these products.
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 26.03.14 ©
Masonry
Timber Stud