Sonelastic
®
Systems
SA-BC Adjustable support for bars and cylinders
Pág. 14 de 24
8.3 Mounting the acoustic sensor in the vertical base and Sturdy Tripod
In the vertical mounting base:
Step 01 -
Insert the acoustic sensor in the vertical mounting base ensuring the wire goes
out through the side opening, as shown below:
Step 02 -
Press the base against the acoustic sensor until it is coupled and secured to the
base.
In the Sturdy Tripod:
Step 01 -
Insert the acoustic sensor in the Sturdy Tripod acoustic sensor clip, as shown
below:
Step 02 -
Slide the acoustic sensor into the clip until the whole acoustic sensor frame is
fully secured, then place its cable over the Sturdy Tripod inner tube.
Step 03
-
Connect the acoustic sensor to the acquisition board audio input.
