APBX IP08 User Manual
8
ATCOM TECHNOLOGY CO., LIMITED
The Dynamic Host Configuration Protocol (DHCP) is a network protocol used to configure devices that are connected
to a network (known as hosts) so they can communicate on that network using the Internet Protocol (IP). It involves
clients and a server operating in a client-server model.
Enable DHCP server
Check to enable DHCP server.
Default Gateway
Gateway information that will be used in DHCP client.
Subnet Mask
Subnet Mask that will be used in DHCP client.
Primary DNS / Secondary DNS
DNS information that will be used in DHCP client.
Start IP / End IP
IP address pool , IP in which will be assigned to DHCP client.
Lease Time
The amount of time the address is leased for DHCP client, When the lease is up, it either renews or gets a new
address.
2.5
System Status
1)
General
Product Model
Show the model of this APBX
Firmware Version
Show the firmware version
System Uptime
Show the time how long the system has been running
System Current Time
Show the current time
2)
Network
Show the network setting of APBX
3)
Peripheral
Show what kinds of / how many modules are detected.
NOTE: All the network settings will take effect after APBX reboot.
