APBX IP08 User Manual
27
ATCOM TECHNOLOGY CO., LIMITED
5.1
Make sure FXO modules are installed
If there are FXO modules installed in your APBX, APBX configures analog trunk trunk automatically when
they are detected.
5.2
Make outbound calls
Go to
PBX Settings
->
Outbound Routes
, click
to add an outbound route.
Outbound Route Name
A unique label to help you identify the outbound route.
Dial Pattern
A filter for marching numbers you dial, the call will be forwarded out via Selected Trunks only when it matches the
dial pattern here. In patterns, some characters have special meanings.
X
means Any Digits from 0-9
Z
means Any Digits from 1-9
N
means Any Digits from 2-9
[1234-9]
means Any Digits in the brackets (in this example, 1, 2, 3, 4, 5, 6, 7, 8, 9)
.
means one or more digits
Strip
: The number of digits that will be stripped from the front of the dialing string before the call is placed via
Selected Trunks.
For example: If set Dial Pattern: 9, Strip: 1, Prepend 123, user need to dial 94567 to dial PSTN number
1234567
NOTE: Before using them, please make sure FXO port is connected with PSTN line (InService). The
connection status can be checked in
System Status
->
Trunk Status
