Terms Of Use
All hints for the correct use of the terminal program refer to HTerm 0.81beta. If you are
working with another version, you have to adjust the settings appropriately.
For HTerm, you have to make the following adjustment from the default setting:
Set “Newline“ to “CR + LF“ (See “Short Introduction to HTerm“ on Page 15 for more
details.)
The handling of the menu and all pop ups of the FlashCard are explained in reference to
the English version.
This manual is only valid for "board 1" FlashCards.
(PCB variants 1.2xx and 1.3xx)
Seite - 4 -
