background image

112

Appendix

For C-UL compliance

 

MISES EN GARDE:

N’utilisez que les adaptateurs inclus avec ce produit. Pour obtenir une pièce de rechange, 

visitez notre site Web au 

www.telephones.att.com

 ou composez le  

1-800-222-3111

. Au Canada, composez le 

1-866-288-4268

.

N’utilisez que la pile de rechargeable incluse ou une pile de rechange (modèle BT183342). 

Pour commander, visitez notre site Web 

www.telephones.att.com

 ou composez 

le 

1-800-222-3111

. Au Canada, composez le 

1-866-288-4268

.

Afin de prévenir les risques d’incendie ou d’explosion de la pile, replacez la pile avec une pile 
du même type. Jetez les piles épuisées en respectant les instructions.

Spécifiquement en rapport avec les téléphones sans fil

Confidentialité : Les mêmes caractéristiques qui rendent les téléphones sans fil si pratiques 
créent également des restrictions. Les appels téléphoniques sont transmis entre le socle 
du téléphone et le combiné par le biais d’ondes radio, et il se peut que vos conversations 
téléphoniques soient interceptées par d’autres équipements de réception d’ondes radio au 
sein de la portée du téléphone sans fil. Pour cette raison, vous ne devez pas considérer les 
conversations sur un téléphone sans fil comme étant aussi confidentielles que celles d’un 
téléphone à cordon.
Alimentation électrique : La base de ce téléphone sans fil doit être branchée à une prise 
de courant électrique fonctionnelle. La prise électrique ne doit pas être contrôlée par un 
interrupteur mural. Les appels ne peuvent pas être effectués à partir du combiné si la base 
n’est pas branchée, si elle est hors fonction ou si le courant électrique est coupé.
Interférences potentielles aux téléviseurs : Certains téléphones sans fil fonctionnent sur 
des fréquences pouvant causer des interférences aux téléviseurs et magnétoscopes. Pour 
réduire ou prévenir de tels parasites, ne pas déposer la base du téléphone sans fil à proximité 
d’un téléviseur ou magnétoscope, ni directement sur celui-ci. Si votre téléviseur affiche des 
interférences, éloignez le téléphone sans fil de celui-ci afin de réduire les parasites.
Piles rechargeables : Ce produit comporte des piles rechargeables à l’hydrure métallique de 
nickel. Usez de prudence lorsque vous manipulez de telles piles et veillez à ne pas les court-
circuiter avec des matériaux conducteurs, tels que des bagues, bracelets et clés. La pile ou le 
conducteur peut surchauffer et vous brûler. Respectez la polarité adéquate entre les piles et 
le chargeur de piles.
Piles rechargeables à l’hydrure métallique de nickel : Jetez ces piles de manière sécuritaire. 
N’incinérez pas et ne peercez pas les piles. Comme pour les autres piles du même type, si 
elles sont brûlées ou percées, des matières corrosives peuvent s’en échapper, ce qui risque 
de causer des brûlures ou autres blessures corporelles.

Le sceau de l’organisme de recyclage RBRC

MD

 sur les piles à l’hydrure 

métallique de nickel signifie que le fabricant de cet appareil participe 
volontairement au programme industriel visant à reprendre et recycler ce 
type de piles lorsqu’elles ne servent plus, au sein du territoire des États-Unis 
et du Canada. Vous devez apporter ces piles chez un détaillant participant ou 
le centre de recyclage le plus près de chez vous. Ou vous pouvez composer 
le 1-800-8-BATTERY

MD

 afin de connaître les endroits qui acceptent les piles à 

l’hydrure métallique de nickel mortes.
RBRC

MD

 et 1-800-8-BATTERY

MD

 sont des marques déposées de Rechargeable 

Battery Recycling Corporation.

Содержание TL92151



































































































































Отзывы: