55
Multiple handset use
Push-to-talk (PTT)
PTT to a group of handsets
When there are multiple handsets registered to the phone system, PTT supports
one-to-group calls. PTT supports a maximum of one-to-four calls when two to
five handsets are registered, and a maximum of one-to-three calls when six or
more handsets are registered. The first 4 registered handsets will be able to use
this feature. Other handsets can only use PTT for one-to-one calls.
To begin a PTT call to a group of handsets:
Press and hold
PUSH TO TALK
when the handset is not in use.
-OR-
Press
PUSH TO TALK
when the handset is not in use. Press
TONE
and
#
, or press
CID
or
DIR
to highlight
Group
, then press
SELECT
or
PUSH TO TALK
.
Your handset displays
Connecting to group...
for a few seconds. When
the connection is made, both your and the destination handsets display
Press and hold [PTT] to talk
and beep once.
Press and hold
PUSH TO TALK
on your handset. A chirp indicates your
microphone is on. Speak towards the handset. Your voice is broadcast to
the destination handset. While you are speaking, the handset displays
PTT To handset X
(
X
represents the destination handset numbers).
Release
PUSH TO TALK
after speaking. All handsets beep once again.
After the handsets beep, you can press and hold
PUSH TO TALK
to
continue speaking or the destination handsets can respond (see
Answer a PTT call
on page 56).
Press
OFF/
CANCEL
or
END
to end the PTT call. The handset displays
Push to talk Ended
for a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call.
NOTE:
After
PUSH TO TALK
is released, the PTT call remains open for a short time. If no
one presses
PUSH TO TALK
within 10 seconds, the PTT call ends automatically.
1.
•
•
2.
3.
4.
