14
Telephone settings
Handset settings
Key tone
The handset is preset to beep with each key press. You can turn
Key tone
off, so there are no beeps when you press keys.
Press
MENU/
SELECT
in idle mode.
Press
DIR
or
CID
to scroll to
>Settings
, then press
MENU
/SELECT
.
Press
DIR
or
CID
to scroll to
>Key tone
, then press
MENU
/SELECT
.
Press
DIR
or
CID
to select
On
or
Off
.
Press
MENU
/SELECT
to save your preference.
Set date/time
The answering system announces the day of the week and time of each
message received prior to playing it. If
CID time sync
is
On
(see
CID time synchronization
on page 15) and you subscribe to caller ID
service, the day, month and time are set automatically with each incoming
call (see
About caller ID
on page 44). However, the year must be set so that
the day of the week can be calculated from the caller ID information.
Follow the steps below to set the month, day, year and time.
Follow steps 1 and 2 in
Key tone
on this page.
Press
DIR
or
CID
to scroll to
>Set date/time
, then press
MENU
/SELECT
.
Press
MENU
/SELECT
to choose
>Date & time
.
Use the dial pad keys (0-9) to enter a two-digit number
(01-12) for the month.
Use the dial pad keys (0-9) to enter a two-digit number
(01-31) for the day.
Use the dial pad keys (0-9) to enter a two-digit number
(00-99) for the year. Press
MENU
/SELECT
.
Use the dial pad keys (0-9) to enter a two-digit number
(01-12) for the hour.
Use the dial pad keys (0-9) to enter a two-digit number
(00-59) for the minute.
Press
DIR
or
CID
to choose
AM
or
PM
. Press
MENU
/SELECT
to confirm. A
confirmation tone sounds.
NOTE:
If the date and time are not set and the handset is powered up,
Set date
and
Set time
appear on the screen to prompt you to set the date and time. You can set the date
and time at this time or set them later by pressing
OFF/
CLEAR
to show the idle mode.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Key tone
>On
Set date
11/20/09
Set time
10:30 PM