AT&T SL82208 страница 63 Скачать руководство пользователя | Manualshive

Страница: 63 / 69

background image

60

Appendix

Limited warranty

4. What is not covered by this limited warranty?
This limited warranty does not cover:

• PRODUCT that has been subjected to misuse, accident, shipping or other

physical damage, improper installation, abnormal operation or handling,
neglect, inundation, fire, water, or other liquid intrusion; or

• PRODUCT that has been damaged due to repair, alteration, or modifica-

tion by anyone other than an authorized service representative of the
manufacturer; or

• PRODUCT to the extent that the problem experienced is caused by signal

conditions, network reliability or cable or antenna systems; or

• PRODUCT to the extent that the problem is caused by use with non-AT&T

accessories; or

• PRODUCT whose warranty/quality stickers, PRODUCT serial number

plates or electronic serial numbers have been removed, altered or ren-
dered illegible; or

• PRODUCT purchased, used, serviced, or shipped for repair from outside the

United States of America or Canada, or used for commercial or institutional
purposes (including but not limited to products used for rental purposes); or

• PRODUCT returned without valid proof of purchase (see item 6 below); or
• Charges for installation or setup, adjustment of customer controls, and

installation or repair of systems outside the unit.

5. How do you get warranty service?

To obtain warranty service in the United States of America, visit

www.telephones.att.com

or call

1 (800) 222-3111

. In Canada dial

1 (866) 288-4268

. NOTE: Before calling for service, please review the user’s

manual - a check of the PRODUCT controls and features may save you a service
call.

Except as provided by applicable law, you assume the risk of loss or damage

during transit and transportation and are responsible for delivery or handling
charges incurred in the transport of the PRODUCT(s) to the service location.
The manufacturer will return repaired or replaced PRODUCT under this limited
warranty to you, transportation, delivery or handling charges prepaid. The
manufacturer assumes no risk for damage or loss of the PRODUCT in transit.
If the PRODUCT failure is not covered by this limited warranty, or proof of pur-
chase does not meet the terms of this limited warranty, the manufacturer will
notify you and will request that you authorize the cost of repair prior to any
further repair activity. You must pay for the cost of repair and return shipping
costs for the repair of products that are not covered by this limited warranty.

«
...
61
62
63
64
65
...
»

Содержание SL82208






































































Отзывы:

Нет отзывов

Похожие инструкции для SL82208

Бренд: NEC Страницы: 144

Бренд: Panasonic Страницы: 224

Бренд: Panasonic Страницы: 58

Бренд: Panasonic Страницы: 7

Бренд: Panasonic Страницы: 40

FREELANCE XD 5100

Бренд: BT Страницы: 2

Бренд: Viking Страницы: 2

Бренд: AT&T Страницы: 12

Бренд: GE Страницы: 48

FortiFone FON-870i

Бренд: Fortinet Страницы: 21

Бренд: Spitfire Страницы: 2

Dialog 4222 Office

Бренд: Aastra Страницы: 2

Бренд: AT&T Страницы: 4

Бренд: Dual Страницы: 12

Бренд: US Robotics Страницы: 70

PowerHouse TR551

Бренд: X10 Страницы: 2

Бренд: Future Call Страницы: 8

Бренд: BellSouth Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды