AT&T Partner MLS 6, Инструкция по установке и эксплуатации

Страница: 73 / 94

Using the Recall Feature Has No Effect
Possible Cause Do This If...
Then:
1. Recall Timer Dura-
Increase the Recall Timer
The Recall feature works, The problem is solved.
tion set too short. Duration.
On a PARTNER phone at
The Recall feature still
Continue increasing the
extension 10,
doesn’t work, interval by increments of 4
1. Press [
Feature
] [
0
] [
0
].
until the problem is solved.
2.
Press the left
(Entire range is 01 to 80.)
[
Intercom
] button If the problem is not
twice.
solved, and if your system
3.
Press [
#
] [
1
] [
0
] [
7
].
is connected to a PBX or
4.
The factory setting is
Centrex, call your local
18. Increase the
phone company for the
setting by 4 by
proper Recall Timer Dura-
entering 22.
tion. (1 = 25 milliseconds.
5.
Press [
Feature
] [
0
] [
0
].
Example: 18 = 450 mil-
liseconds.)
Using the Recall Feature Disconnects Call
This problem applies only when the PARTNER system is connected to a PBX or Centrex.
Possible Cause Do This
If... Then:
1. Recall Timer inter- Decrease the Recall Timer
The Recall feature works The problem is solved.
val set too long. Duration.
properly,
On a PARTNER phone at
extension 10,
1.
Press [
Feature
] [
0
] [
0
].
2. Press the left
[
Intercom
] button
twice.
3.
Press [
#
] [
1
] [
0
] [
7
].
4.
The factory setting is
18. To decrease the
duration, enter a
lower number (01 to
17).
5.
Press [
Feature
] [
0
] [
0
].
The Recall feature still
Continue decreasing the
disconnects calls, interval until the problem is
solved. (Entire range is 01
to 80.) If the problem is
not solved, and if your
system is connected to a
PBX or Centrex, call your
local phone company for
the proper Recall Timer
Duration. (1 = 25 mil-
liseconds. Example:
18 = 450 milliseconds.)
Troubleshooting
7-5