AT&T Partner MLS 6, Инструкция по установке и эксплуатации

Страница: 34 / 94

Auto Dialing
With Auto Dialing, anybody with a PARTNER 12-button phone can store up to
eight outside phone numbers on Auto Dial buttons. This allows the number to
be dialed with a single touch. Any user can store Auto Dial numbers on his or
her phone. Or, you can work at extension 10 to store Auto Dial numbers on
other phones.
Like Speed Dial numbers, Auto Dial numbers can include numeric sequences
and special functions.
To store an Auto Dial number on another extension (from extension 10):
To store an Auto Dial number at
an individual phone, see p. 4-4.
You can also use this procedure
to store a new Auto Dial number
over another one already
assigned to a button.
To dial and Auto Dial number,
simply press the Auto Dial but-
ton.
You must use a PARTNER 12-
button phone at extension 10 to
remove an Auto Dial number from
another phone.
1.
2.
3.
4.
5.
6.
7.
Press [
Feature
] [
0
] [
0
].
Press the left [
Intercom
] button twice.
Press the right [
Intercom
] button.
Dial the 2-digit extension on which the number will be stored.
Ext. 10 now functions as if it were the extension on which the number will be
stored.
Press the button to which you want the Auto Dial number assigned. (Auto
Dial buttons are shown on p. 4-1.)
Dial the outside number, maximum 20 digits. (To include the Pause, Stop,
Touch-Tone Enable, or Recall functions, see p. 3-7.) To store another
number on the same extension, return to step 5. To store a number on a
different extension, return to step 3.
When you are finished, press [
Feature
] [
0
] [
0
].
IMPORTANT:
When programming and/or testing emergency numbers (such
as 911 or other emergency services):
1. Remain on the line and briefly explain to the dispatcher the reason for the
call before hanging up.
2. Perform such activities during the off-peak hours, such as early morning or
late evening.
To remove an Auto Dial number from any extension (from extension 10):
1.
2.
3.
4.
5.
6.
7.
Press [
Feature
] [
0
] [
0
].
Press the left [
Intercom
] button twice.
Press the right [
Intercom
] button.
Dial the 2-digit number of the extension on which the number is stored.
Ext. 10 now functions as if it were the extension on which the number is stored.
Press the button from which you want the Auto Dial number removed.
Press [
Mic
].
To remove another number from the same extension, return to step 5. To remove
a number from another extension, return to step 3.
When you are finished, press [
Feature
] [
0
] [
0
].
3-6
Customizing Your System