6
T E L E P H O N E M E M O R Y
This cordless phone can store 10 telephone numbers that
you can dial just by pressing
m
and a number button.
Storing Memory Numbers
1
Make sure the PHONE light is off.
2
Press and release
G
. The PHONE light blinks.
3
Enter the number you want to store (up to 24 digits)
— OR —
Press
R
to store the last number dialed.
4
Press
m
.
5
Enter a memory location (0–9). The handset sounds a
tone to confirm the number has been stored.
NOTE:
You can use the self-adhesive directory label to
keep a record of telephone numbers stored in memory
locations. It’s best to write on the label before applying it
to the phone.
Changing/Replacing Stored
Memory Numbers
You can change or replace a stored number by storing a
new number in its place.
Storing a Pause in a Memory Number
While storing a number in memory, hold down the button
of the number that comes before the pause until you hear a
second beep. This inserts a two-second pause after that
digit. To insert a longer pause, hold the button down until
you hear a third or fourth beep. Each time you hear a beep,
the pause is two seconds longer.
For example
, to store 9, PAUSE, 555–0123 in memory
location 3: Press
G
,
9
(hold until the second beep),
5 5 5 0 1 2 3
,
m
,
3
.
Dialing Memory Numbers
1
Press
P
.
2
Press
m
.
3
Enter the memory location (0–9) of the number you’re
calling.
Erasing Memory Numbers
1
Make sure the PHONE light is off.
2
Press and release
G
. The PHONE light blinks.
3
Press
m
, then enter the memory location (0–9)
you want to erase. The handset sounds a tone to
confirm the number has been erased.
