Configuring Voice User
During the registration process, you will be prompted to enter the phone number you want to
receive Voice calls. This is usually the Primary User. Note: the Product can only be configured
to call one phone number at a time. To change the designated telephone number, click on the
User’s tab. On the line that displays the individual User’s information, you will see 3 tabs to the
right titled: EDIT, SET VOICE USER, and DELETE. Click on SET VOICE USER for the person
you wish to designate to receive calls from your child. If set correctly, a pop up will display the
words “Update Successful” and the button will change to say CURRENT VOICE USER.
To initiate a call to your Amber Alert GPS Product, call the phone number that was listed in the
“Important Information” section during the registration process.
By calling the Product, you will be able to talk to the person
wearing the device. If the volume is turned all the way down, the
Product will not ring when called and conversation may not be
audile. Volume will increase for both Product ring and
conversation when Volume Up button is pressed. Please adjust
accordingly.
The Product will automatically answer the incoming call after 2
audible rings heard only on the caller’s phone. The Product will
continue to report locations during the voice call.
Important Note Regarding Voice Monitoring: The legality of listening to conversations in
which you are not a participant is governed by local, state and federal law. Consult all ap-
plicable laws to determine the conditions pursuant to which you are permitted to listen to
conversations without the consent of one or all of the parties to the conversation. You are
responsible for complying with all applicable laws (see page 35).
16
