AT&T 7406BIS, Руководство пользователя

Страница: 23 / 36

Speaker
Note: Your voice terminal is set for either the Speaker (listen-only) or the
Speakerphone (listen and talk) function. Check with your System Manager to see
which of these two features you can use.
Use the following procedures if your voice terminal is set for the Speaker (listen only)
feature.
To place a call without
lifting the handset, or to
use speaker with any
listening-only activity
(such as, monitoring a call
on which you have been
put on hold or for group
listening)
Note: In order for the
other party to hear you,
you must speak through
the handset.
1
Press [
Speaker
]
2
Place call or access selected feature
3
Adjust speaker volume if necessary
●
To raise the volume, press the right half of the
Volume control button labeled [
▲
];
to lower the volume, press the left half of the
Volume control button labeled [
▼
]
●
If you have a display, it shows
[ SPEAKER L>>>> H ]
(There are 8 possible volume settings. On the
display, 1 arrow is the lowest setting, and 8
arrows is the highest setting)
To mute the microphone
1 Press [
Mute
]
associated with the
handset so the other party
●
Red light goes on and other party cannot hear
cannot hear you
you
2
Press [
Mute
] again to resume talking to other party
through handset
●
Red light goes off and other party can hear you
again
To activate the speaker
1
Press [
Speaker
]
while using the handset
●
The handset and speaker are both active
Note: If you want to speak to the other party, you
must speak through the handset. If you hang up the
handset, the call is disconnected.
To turn off speaker and
1
Press [
Speaker
]
return to handset
●
The speaker turns off, but the handset remains
active
21