Select Ring
✔
To select a personalized
1
Press [
Shift
]
ring
●
Green light comes on
2
Press [
Select Ring
]
●
Shift light flashes; current ring pattern plays and
repeats every 4 seconds
●
If you have a display it shows [
PERSONAL RING
#x
]
(x will be a number from 1 to 8)
3
Adjust ringer volume with volume control switch on
left underside of voice terminal, if desired
4
Repeat Step 2 to cycle through all 8 ring patterns
5
Press [
Shift
] again when you hear the desired ring
pattern
●
Your new ring is set; Shift light goes off
Note:
If you receive a call during selection,
process is interrupted and you must begin again.
Self-Test
✔
To test the lights and
1
Press [
Shift
]
ringer of your voice
terminal
●
Green light goes on
2
Press and hold [
Drop
]
●
Ringer sounds
●
All columns of lights next to buttons above and
to right of dial pad go on steadily
●
Display is activated
3
Release [
Drop
] to end test
●
Ringer and lights return to pretest state
Note:
If ringer or lights do not respond during
test, notify your System Manager.
19
