To program/reprogram an
outside number,
extension, or feature code
into a personal list
1
2
3
4
5
6
7
On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want
to program as items on your personal list(s) (see
example to the left)
Note:
Each telephone number or feature code is
stored as a separate item.
Press [
Program
]
or Dial AD Program code
[dial tone]
Dial Personal List number (1, 2, or 3)
[dial tone]
Dial list item (1, 2, 3,..)
[dial tone]
Dial number you want to store (up to 24 digits)
Note:
If you are programming an outside number,
be sure to include a trunk code, if applicable.
Press [
#
]
[confirmation tone]
●
Repeat Steps 4-6 if you want to program
additional items on the same list; press [
Drop
]
and begin again at Step 1 if you want to program
items on another list
Hang up or press [
Drop
] to end programming
Note:
Record your personal list items on the
Abbreviated Dialing list in the back of this booklet;
group, system, and enhanced lists can be obtained
from your System Manager.
To place a call using an
AD list button or code
1
Press [
Pers List
] or [
Grp List
] or [
Sys List
]
2
or Dial appropriate AD List code:
●
List 1
●
List 2
[dial tone]
●
List 3
Note:
An [
Enhcd List
] may also be available; see
you System Manager.
Dial desired list item (1, 2, 3...)
●
Call is dialed
10
